Glass bead blasting media has its advantages and disadvantages just like any other type of blasting media. It is important to understand the common applications and the equipment used with this media type to determine if it is right for you.
The Advantages to Glass Bead Blasting
Glass bead blasting media is safer than many other media types. It is a good choice with you need an alternative to silica sand. You can reuse glass beads a few times before you need to replace them, typically lasting through four to six cycles. In addition, you can use glass beads in a pressure blast or suction cabinet, which can save you money.
The Disadvantages of Glass Bead Blasting
Glass bead blasting media does not clean as quickly as other media types. In addition, it does not last as long as some of the harder media, such as steel.
Common Uses for Glass Bead Blasting
One of the most common uses for glass bead blasting is cabinets. It cleans the surface and does not leave a noticeable blasting profile. It works well to remove paint and rust.
Equipment Used with Glass Bead Blasting
Glass bead blasting media is intended to be reused, which means specific equipment is required. Typically, it is used in a blast cabinet. Because it is a light media, it works best in a suction feed cabinet. While you can use crushed glass blasting media with a standard blast pot, it is not commonly used with this media.
If you are looking for bead blasting media, look no farther than Opti-Blast. Visit us today at https://www.optiblast.com/
